7mm Packaging Hot Melt Adhesive OODA-38D

Product no.:

OODA-38D

Appearance:

White Translucent Stick

Softening point:

86℃ ± 3℃

Viscosity(180℃):

4600 ± 500 CPS

Components:

EVA resin, tackifying resin, paraffin, additives,   etc.

Features:

All type plastic film laminating. / High   Softening Point / Can replace Pressure Sensitive Adhesives.

Application:

Paper products / Furniture / Packing and   carton sealing / Plastic film laminating.

Usage:

1.Temperature control: The operating   temperature is usually controlled between 160 ℃~ 180 ℃, but not exceed 220 ℃. Check the temperature regularly, and use   laboratory thermometer , metal thermometer, electrode thermometer directly   and systematically. If necessary, readjust it again. Because of long time   working,, the thermometer installed on the machine may give the wrong   information.
  2.Lining speed: 12~15 m/min, according to the width of the edge, low speed   can lead to errors.
  3.The consumption of hot melt adhesive for sealing side: 300~400g/m².

Packing & Storage

Paper bags packing, 25Kg/bag. Stored in a   cool and dry place, storage period is two years.

Note:

1.Opening and curing time will vary with the   temperature at which the adhesive is heated, coating amount, sticking period   and the strength.
  2.The temperature of the melting system is high, please do not touch it with   your hand in order to avoid scald.
  3.If the glue drop on the skin, the burnt part should be immediately immersed   in cold water for at least 15 minutes and then sent to hospital to be   treated.

About Us:

Our global sales target is to start from   Asian countries, Taiwan, Middle Eastern countries, and Southern America, then   gradually covers western countries with various distribution channels