Auto Hot Melt Glue OODA-835Y
Application : Adhering plastic smooth and difficult adhere surface. / All type plastic film laminating.
Hot Melt Glue Stick
Yellow Transparent Stick
86℃ ± 3℃
13500 ± 500 CPS
EVA resin, tackifying resin, paraffin, additives, etc.
Adhering plastic smooth and difficult adhere surface. / High Softening Point.. / Can replace Pressure Sensitive Adhesives/supper bonding
Adhering plastic smooth and difficult adhere surface. / All type plastic film laminating.
Insert glue stick inside the glue gun and connect 220V power supply. It can be used after being preheated for ten minutes. The operating temperature is 160℃～180℃.
Packing & Storage
Paper bags packing, 25Kg/bag. Stored in a cool and dry place, storage period is two years.
1.Opening and curing time will vary with the temperature at which the adhesive is heated, coating amount, sticking period and the strength.
Should be used in a well-ventilated place.
Personal Protective Equipment
Although the smoke and smell of hot melt glue is not poisonous. Still recommend to wear breathing mask because everyone feels different.
Heat insulation gloves
Skin and Body Protection
Long sleeve clothing or protective clothing can avoid scald accident when using hot melt glue.
No special requirements